位置:首页 > 产品库 > 6-Mercaptopurine hydrate
立即咨询
咨询类型:
     
*姓名:
*电话:
*单位:
Email:
*留言内容:
请详细说明您的需求。
*验证码:
 
6-Mercaptopurine hydrate
本产品不向个人销售,仅用作科学研究,不用于任何人体实验及非科研性质的动物实验。
6-Mercaptopurine hydrate图片
CAS NO:6112-76-1

6-巯基嘌呤 一水合物
Mercaptopurine hydrate
6-MP hydrate
6-Mercaptopurine hydrate (Mercaptopurine hydrate; 6-MP hydrate) 是一种嘌呤类似物,是内源性嘌呤的拮抗剂且已被广泛用作抗白血病药物和免疫抑制药物。
生物活性

6-Mercaptopurine hydrate (Mercaptopurine hydrate; 6-MP hydrate) is a purine analogue which acts as an antagonist of theendogenous purinesand has been widely used as antileukemic agent and immunosuppressive drug.

IC50& Target

endogenous purines[1]

体外研究
(In Vitro)

6-Mercaptopurine hydrate (Mercaptopurine hydrate; 6-MP hydrate) induces NR4A3 transcriptional activity 1.6- to 11-fold (P<0.01) in a dose-responsive manner. It is found that 6-Mercaptopurine hydrate leads to a dose-dependent increase in NR4A3 protein levels.
6-Mercaptopurine hydrate treatment increases cell surface GLUT4 in both basal cells 1.8- to 3.6-fold (P<0.01) and insulin-stimulated cells 2.9- to 4.4-fold (P<0.01) over that in controls. It is also found that 6-Mercaptopurine hydrate increases phospho-AS160 significantly in a dose-responsive manner under both basal and insulin-stimulated conditions[2].

体内研究
(In Vivo)

In the fetal telencephalons of the 6-Mercaptopurine hydrate (6-MP)-treated group, the S phase cell population increases at 36 and 48 h and returns to the control level at 72 h after treatment. The G2/M phase cell population begins to increase at 24 h, peaks at 36 h, decreases at 48 h, and finally returnes to the control level at 72 h. On the other hand, the sub-G1 phase cell population (apoptotic cells) begins to increase at 36 h, peaks at 48 h, and then decreases at 72 h[3].

Clinical Trial
分子量

170.19

性状

Solid

Formula

C5H6N4OS

CAS 号

6112-76-1

中文名称

6-巯基嘌呤水合物;6-巯基嘌呤 一水合物

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder-20°C3 years
4°C2 years
In solvent-80°C6 months
-20°C1 month
溶解性数据
In Vitro: 

DMSO : 50 mg/mL(293.79 mM;Need ultrasonic)

H2O :< 0.1 mg/mL(insoluble)

配制储备液
浓度溶剂体积质量1 mg5 mg10 mg
1 mM5.8758 mL29.3789 mL58.7579 mL
5 mM1.1752 mL5.8758 mL11.7516 mL
10 mM0.5876 mL2.9379 mL5.8758 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40%PEG300   5%Tween-80   45% saline

    Solubility: ≥ 2.5 mg/mL (14.69 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (14.69 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

    将 0.9 g 氯化钠,完全溶解于 100 mL ddH2O 中,得到澄清透明的生理盐水溶液
*以上所有助溶剂都可在本网站选购。
 
 
维奥蛋白资源库 - 中文蛋白资源 CopyRight © 2010-2024