位置:首页 > 产品库 > CID5721353
立即咨询
咨询类型:
     
*姓名:
*电话:
*单位:
Email:
*留言内容:
请详细说明您的需求。
*验证码:
 
CID5721353
本产品不向个人销售,仅用作科学研究,不用于任何人体实验及非科研性质的动物实验。
CID5721353图片
CAS NO:301356-95-6

CID5721353 是一种BCL6抑制剂,IC50为 212 μM,Ki值为 147 μM。
生物活性

CID5721353 is an inhibitor ofBCL6with anIC50value of 212 μM, which corresponds to aKiof 147 μM.

IC50& Target

IC50: 212 μM (BCL6)[1]
Ki: 147 μM(BCL6)[1]

体外研究
(In Vitro)

BCL6 is a member of the BTB/POZ family of transcription factors. CID5721353 (Compound 79-6) specifically inhibits BCL6 repressor activity. CID5721353 disrupts BCL6 transcriptional complexes and reactivates BCL6 target genes. CID5721353 can specifically kill primary human DLBCL cells. Fifteen of 19 BCL6-positive cases (79%) display greater than 25% loss of viability in response to CID5721353 at 125 or 250 μM[1].

体内研究
(In Vivo)

In order to test whether CID5721353 (Compound 79-6) can perform as an anti-lymphoma therapeutic agent in vivo, whether it can penetrate tumors after parenteral administration through a distal site is determined. For this purpose 107OCI-Ly7 cells are injected into the right flank of 10 SCID mice and allowed to form tumors. Once tumors reach ~1.5 grams, animals are injected IP with a single dose of 50 mg/kg of CID5721353 in 10% DMSO or vehicle (10% DMSO) and sacrificed at 0.5, 1, 1.5, 3, 6, 12 and 24 hours after CID5721353 administration. Blood and tumors are harvested. Quantitative HPLC/MS analysis of the serum shows that CID5721353 levels peak (to 55 μg/mL, which is equivalent to a 122 μM concentration) one hour after the IP injection. CID5721353 also reaches its highest peak (24.5 ng/mg) at the 1-hour time point in the tumors, and after a sharp decline in levels, decreases gradually over 24 hours[1].

分子量

457.28

性状

Solid

Formula

C15H9BrN2O6S2

CAS 号

301356-95-6

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder-20°C3 years
4°C2 years
In solvent-80°C6 months
-20°C1 month
溶解性数据
In Vitro: 

DMSO : 50 mg/mL(109.34 mM;Need ultrasonic)

配制储备液
浓度溶剂体积质量1 mg5 mg10 mg
1 mM2.1868 mL10.9342 mL21.8684 mL
5 mM0.4374 mL2.1868 mL4.3737 mL
10 mM0.2187 mL1.0934 mL2.1868 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40%PEG300   5%Tween-80   45% saline

    Solubility: ≥ 2.5 mg/mL (5.47 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (5.47 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

    将 0.9 g 氯化钠,完全溶解于 100 mL ddH2O 中,得到澄清透明的生理盐水溶液
  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20%SBE-β-CDin saline)

    Solubility: ≥ 2.5 mg/mL (5.47 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (5.47 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

    将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中,再用生理盐水定容至 10 mL,完全溶解,澄清透明
*以上所有助溶剂都可在本网站选购。
 
 
维奥蛋白资源库 - 中文蛋白资源 CopyRight © 2010-2024