ML-9 是 Akt 激酶的选择性强效抑制剂,可抑制肌球蛋白轻链激酶 (MLCK) 和基质相互作用分子1 (STIM1) 的活性。 ML-9 抑制 MLCK,PKA 和 PKC 活性,Ki值分别为 4、32 和 54 μM。 ML-9 通过刺激自噬小体的形成并抑制其降解来诱导自噬 (autophagy)。
生物活性 | ML-9 is a selective and potent inhibitor ofAktkinase, inhibitsmyosinlight-chain kinase (MLCK) and stromal interaction molecule 1 (STIM1) activity[3]. ML-9 inhibits inhibits MLCK,PKAandPKCactivity withKivalues of 4, 32 and 54 μM, respectively[1]. ML-9 inducesautophagyby stimulating autophagosome formation and inhibiting their degradation[3]. |
体外研究 (In Vitro) | ML9 (0-100 μM; 0-24 hours) has no reduction in cardiomyocyte viability, 50-100 μM significantly induces cell death[2].ML9 (50 μM; 1-4 hours) significantly increases cleaved caspase-3 levels, decreased STIM1 protein levels by about 42%[2].
Cell Viability Assay[1] Cell Line: | Neonatal rat ventricular myocytes (NRVM) cells | Concentration: | 0, 10, 50 and 100 μM | Incubation Time: | 0, 1, 4, 8 and 24 hours | Result: | Decreased cell viability at 50-100 μM concentration. |
Apoptosis Analysis[1] Cell Line: | Neonatal rat ventricular myocytes (NRVM) cells | Concentration: | 50 μM | Incubation Time: | 1, 4 and 8 hours | Result: | Induced cardiomyocyte death through necrosis and apoptosis. |
|
分子量 | |
性状 | |
Formula | |
CAS 号 | |
运输条件 | Room temperature in continental US; may vary elsewhere. |
储存方式 | 4°C, sealed storage, away from moisture *In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture) |
溶解性数据 | In Vitro: DMSO : 83.33 mg/mL(230.65 mM;Need ultrasonic) H2O : ≥ 5 mg/mL(13.84 mM) *"≥" means soluble, but saturation unknown. 配制储备液 1 mM | 2.7679 mL | 13.8393 mL | 27.6786 mL | 5 mM | 0.5536 mL | 2.7679 mL | 5.5357 mL | 10 mM | 0.2768 mL | 1.3839 mL | 2.7679 mL |
*请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。 In Vivo: 请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂: ——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用;
以下溶剂前显示的百 分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶 1. 请依序添加每种溶剂: 10% DMSO 40%PEG300 5%Tween-80 45% saline Solubility: ≥ 2.08 mg/mL (5.76 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL (5.76 mM,饱和度未知) 的澄清溶液。 以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。 2. 请依序添加每种溶剂: 10% DMSO 90% (20%SBE-β-CDin saline) Solubility: ≥ 2.08 mg/mL (5.76 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL (5.76 mM,饱和度未知) 的澄清溶液。 以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。 3. 请依序添加每种溶剂: 10% DMSO 90%corn oil Solubility: ≥ 2.08 mg/mL (5.76 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL (5.76 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。 以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。 *以上所有助溶剂都可在本网站选购。
|