BX471 hydrochloride (ZK-811752 hydrochloride) is a potent, selective non-peptideCCR1antagonist withK_iof 1 nM for humanCCR1, and exhibits 250-fold selectivity forCCR1overCCR2,CCR5andCXCR4.

BX471 is a potent functional antagonist based on its ability to inhibit a number of CCR1-mediated effects including Ca²⁺mobilization, increase in extracellular acidification rate, CD11b expression, and leukocyte migration. BX471 demonstrats a greater than 10,000-fold selectivity for CCR1 compared with 28 G-protein-coupled receptors^[1]. BX471 is also able to displace¹²⁵I-MIP-1α/CCL3 binding to mouse CCR1 in a concentration-dependent manner with a K_iof 215±46 nM. Increasing concentrations of BX471 inhibits the Ca²⁺transients induced by MIP-1α/CCL3 in both human and mouse CCR1 with IC₅₀of 5.8±1 nM and 198±7 nM, respectively^[2]. BX471 (0.1-10 μM) shows a dose-dependent inhibition of RANTES-mediated and shear-resistant adhesion on IL-1β-activated microvascular endothelium in shear flow in isolated blood monocytes. BX471 also inhibits the RANTES-mediated adhesion of T lymphocytes to activated endothelium^[4].

BX471 (4 mg/kg, p.o. or i.v.) is orally active with a bioavailability of 60% in dogs. Furthermore, BX471 effectively reduces disease in a rat experimental allergic encephalomyelitis model of multiple sclerosis^[1]. BX471 (20 mg/kg, s.c.) reaches peak plasma levels of 9 μM by around 30 minutes, and this rapidly declines to approximately 0.4 μM after 2 hours. From 4 to 8 hours the drug plasma levels drops to 0.1 μM or lower. Mice treated with 20 mg/kg of BX471 for 10 days shows a reduction of interstitial CD45 positive leukocytes of approximately 55%. BX471 has a borderline significant effect on the number of CCR5-positive CD8 cells in the peripheral blood. BX471 reduces the amount of FSP1-positive cells by 65% in UUO kidneys as compared with vehicle control^[2]. Pretreatment witih BX471 reduces macrophage and neutrophil accumulation in kidney after ischemia-reperfusion injury^[3].

471.35

Solid

C₂₁H₂₅Cl₂FN₄O₃

288262-96-4

Room temperature in continental US; may vary elsewhere.

-20°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

DMSO : 150 mg/mL(318.23 mM;Need ultrasonic)

H₂O :< 0.1 mg/mL (ultrasonic)(insoluble)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 3 mg/mL (6.36 mM); Clear solution

  此方案可获得 ≥ 3 mg/mL (6.36 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 30.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 3 mg/mL (6.36 mM); Clear solution

  此方案可获得 ≥ 3 mg/mL (6.36 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 30.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 3.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 3 mg/mL (6.36 mM); Clear solution

  此方案可获得 ≥ 3 mg/mL (6.36 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 30.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。