A-443654 is apan-Aktinhibitor and has equal potency againstAkt1,Akt2, orAkt3within cells (K_i=160 pM)^[1].

A-443654 exhibits a K_i of 160 pM, a 30,000-fold improvement in potency versus the initial lead molecule. A-443654 is 40-fold selective for Akt over PKA. A-443654 inhibits Akt1, Akt2, or Akt3 equally within cells. A-443654 reduces the P-GSK3 in a dose-responsive manner in all three cell lines. A-443654 inhibits the proliferation of tumor cells with EC₅₀of 0.1 μM^[1]. A-443654-induced morphological changes occur very rapidly (within 2 to 4 h) in both 10A and 10CA1a cells, with 10CA1a cells more sensitive to A-443654 than the 10A cells. A-443654 alone at 2 μM causes the 10CA1a cells, but not the 10A cells, to detach from the plate after 12 h, whereas 1 μM of A-443654 causes 10CA1a cells to detach from the plate after 12 h. FACScan Analysis of rapamycin and A-443654 effects on DNA content in 10A and 10CA1a cells. In contrast, A-443654 at 2 and 5 μM decreases Bcl-2 levels by 30 to 40% in the 10CA1a cells at 8h. The combination of rapamycin with 2 or 5 μM A-443654, however, markedly decreases Bcl-2 protein levels by appr 40 to 50% in the 10A cells and by appr 70% in the 10CA1a cells, respectively^[2]. A-443654 demonstrates the greatest selective effect on the mutant cells compared to the WT cells with greater than 3.5 fold relative growth inhibition of the mutant cells^[3].

A-443654 (7.5 mg/kg/d, s.c.) inhibits tumor growth in the 3T3-Akt1 flank tumor model. A-443654 (50 mg/kg, s.c.) induces apoptosis in 3T3-Akt1 flank tumors. A-443654 (30 mg/kg, s.c.) leads to increased levels of phosphorylated Akt1 in MiaPaCa-2 tumors^[1].

397.47

Solid

C₂₄H₂₃N₅O

552325-16-3

Room temperature in continental US; may vary elsewhere.

DMSO : ≥ 100 mg/mL(251.59 mM)

*"≥" means soluble, but saturation unknown.

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.5 mg/mL (6.29 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (6.29 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.5 mg/mL (6.29 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (6.29 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 3.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 2.5 mg/mL (6.29 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (6.29 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。